You can buy it from a range of stores including direct from Turtle Beach for £379.99 (local prices may vary). Right now, the Turtle Beach VelocityOne Flightdeck HOTAS is available for Windows 10/11 PCs and compatible with a range of flight simulators including Microsoft Flight Simulator, DCS and X-Plane. You can customize the HOTAS to your liking by adjusting the RBG lighting. Other buttons and controls include a functioning gear lever, numerous hat switches, flap controls, and much more. Turtle Beach has given you the choice of using either the throttle, the stick or a combo of both as they plug in separately via 2 USB cables. The onboard OLED HUD will also help you by displaying diagnostics and performance information, so you can view it with just a glance. Using the on-hardware display, you can also adjust the detent response of the throttles that suit whatever you’re playing at the time. NOTE: The short 2 wire cable from the push/pull switch is already connected to Location 13 on the Interface Board when shipped.The Flightdeck HOTAS has been built with hall-effect sensors to provide a long-lasting and durable product, that also provides high levels of accuracy.
I found it, 'toggle brakes regular effort' i assigned that to the trigger on my joystick. Maybe just try the trigger on your joystick. I assigned the parking brake to key1 on my joystick, I think. If broken, standard repair fees and return shipping cost will be imposed. Look under the throttle quadrant for the parking brake. DTA will not be held responsible for any breakage of this type. I can only activate the parking brake with the mouse. But since the last couple of updates I cant find a parking brake option on the setting menu any longer. If you try to remove the handle, you will break the switch null and Voiding any Warrenty. commented by kerwinfly (37 points) I thought when I first set up X-Plane 11 there was an option to set up the parking brake for a joystick. Please Note: The Parking Brake Handle is Press-Fitted onto the shaft of the Push/Pull switch and can not be removed. Please note that these Instructions do not apply to the Classic Model 2400 Parking Brake. The Parking Brake can now use flight controls as: I did not have any problem toggling the brakes on and off with the v or b keys. Unscrew and remove the lid of the Plastic Cabinet, find and remove the 2-pin cable soldered from the push/pull switch to the interface board at location 19. Please check your keyboard configuration to make sure you havent set the v key to anything else.
To get the Parking Brake to work with P3D, you might need to do a minor change to the Parking Brake wiring. P3D (with the push/pull switch connected to location#13) Under Flight Controls BASIC, find and click on Toggle Brakes Maximum Effort.
With Parking Brake+ highlighted, pull the handle out. YOU have a conflict with the brake assignment in joystick menu ( brakes are assigned to more than one axis for example) You have a bad USB cable. With the Parking Brake connected and X-Plane 11 loaded and running, goto the SETTINGs Window. If your brakes dont work then one of the following is the problem: your brake controller is not working correctly (dirty pots or disconnected wires), i have seen this happen. X-Plane 11 (with the push/pull switch connected to location#1) Under Flight Controls, look and click on Toggle Brakes Maximum Effort. On the right side look for and click on Flight Controls. note a small check mark appears on the left side of the screen. With the Parking Brake connected and X-Plane 10 loading and Running, goto the SETTINGs window. Then click OKįor X-Plane 10 (with the push/pull switch connected to location#1) Make sure that the Repeat Bar is all the way to the RIGHT. You should see Button 19 appear in the window. When DELETED, find and click on Brakes (apply/release). First, you need to DELETE all default settings seen in the window. Look Controller Type for the Parking Brake + link. With the Parking Brake connected and FSX loaded and running, goto the SETTINGs Window. The 2405 is sensed as a standard HID Joystick, so Driver software is automatically installed by your computer for easy Plug-'n-Play installation.įor FSX and FSX Steam Edition (with the push/pull switch connected to location#1) Designed with the look and feel of a REAL Aircraft Parking Brake, the 2405 adds the REALISM of Flight but without the HIGH Cost.Ĭonnect the Parking Brake to an Available USB Port on the back of your computer. You can easily increase the realism of your flight by adding this Parking Brake Panel. The 2405 is compatible with FS2004, FSX, FSUIPC, MS2020, Prepar3d and X-Plane. Thank you for your purchase of our new Model 2405 USB Parking Brake.